Licensed & Insured, in Wichita and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Wichita
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (316) 330-3219 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Wichita and surrounding areas · On-site visits included · Free estimate within 24h
Wichita Metal Roofing is a team of local certified professionals based in Wichita. We respond quickly in Wichita and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (316) 330-3219⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews
“Our grain barn out on the west side had rusted panels leaking over the silos every time it rained. The crew tore off the old corrugated stuff and put up new ribbed panels on the whole 60x100 barn in three days. No more water in the feed bins, and they hauled off every last scrap.”
Commercial & Agricultural Metal Roofing
“We were dreading a full tear-off on our 1950s ranch near the front porch, but they did the retrofit right over the shingles and saved us thousands. The crew of four knocked it out in two days and the porch entry looks like a different house now.”
Metal Roof Over Shingles (Retrofit)
“Half the fasteners on our old equipment shed were backing out and the panels were flapping in the wind. They came out, replaced every screw, re-fastened the loose panels and checked the flashing around the vent stacks. Solid work at a fair price, and the shed is tight again.”
Metal Roof Repair
“Went with standing seam on our 2,400 square foot house and could not be happier. The panels are dead straight, the color is exactly what we picked, and the crew cleaned the yard so well you'd never know they'd been there. Four months in and it's been through two hail storms without a mark.”
Standing Seam Metal Roofing
“Had a stubborn leak around the chimney that two other guys couldn't find. These folks traced it to failed flashing, fixed it properly, and we've had zero drips since. Only gripe is they were booked out almost three weeks, but worth the wait.”
Metal Roof Leak Repair
“Our old metal roof was rusted through in spots and we finally pulled the trigger on a full replacement. They stripped it down to the deck, put up new stone-coated steel panels and it looks fantastic. Three-day job, and they walked me through everything before they started.”
Metal Roof Replacement
“After that big wind storm I had them come inspect the roof before filing an insurance claim. They got up there, photographed everything, and gave me a written report the same day. Turns out I only needed a few panels re-fastened and some snow guards tightened, not a whole new roof. Honest people.”
Metal Roof Inspection
“We wanted the brick house to keep its classic look, so we went with metal shingles instead of panels. Installation took about a week and a half, and the crew was respectful of the landscaping the whole time. The finish matches the brick way better than I expected. Only small thing was a little debris left in the gutters, but they came back and cleared it out.”
Metal Shingle RoofingReal photos of our work in Wichita · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel install | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, and standard flashing; steeper pitch and deck repair move the price. |
| Standing seam install | Starting at $12/sq ft | Concealed fasteners, premium underlayment, and full flashing; complex roof lines and dormers add labor. |
| Stone-coated steel install | Starting at $14/sq ft | Class 4 impact-rated stone finish with matching trim; HOA-approved colors may add lead time and cost. |
| Metal shingle or specialty metal install | On estimate | Stamped shingle, copper, and zinc need an on-site look for panel layout, patina choice, and flashing scope. |
| Travel | Included | In Wichita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes panels, clips, underlayment, and standard trim; steeper pitch and complex valleys raise the rate. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Powered seaming on every seam; larger roof runs and second-story access move the price up. |
| Class 4 impact-rated standing seam | Starting at $15/sq ft | Hail-rated panels and premium finish; panel gauge and color selection affect the final figure. |
| Tear-off and deck repair | Quoted per job | Existing layers, deck condition, and dump fees vary house to house, so we price after inspection. |
| Complex or large-scale job | On estimate | Cut-up rooflines, historic districts, and commercial or agricultural spans need an on-site look first. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off metal replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, flashing, and impact-rated metal system installed. |
| Standing seam replacement | Starting at $12/sq ft | Concealed-fastener panels over new deck protection, with price rising on steep pitch and complex hips. |
| Stone-coated steel replacement | Starting at $11/sq ft | Impact-rated stone-coated panels after full strip, priced higher for HOA-approved colors and profiles. |
| Deck repair allowance | On estimate | Soft or rotten sheathing found after tear-off is priced per sheet before work continues. |
| Travel | Included | In Wichita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit | Starting at $7/sq ft | Includes underlayment, basic trim, and ribbed steel panels over one existing shingle layer. |
| Standing seam retrofit | Starting at $10/sq ft | Concealed fasteners and subframe work; price rises with roof pitch and valley count. |
| Stone-coated steel retrofit | Starting at $11/sq ft | Stone-faced steel shingles for HOA and historic districts; includes matching trim and hip caps. |
| Complex or large-scale job | On estimate | Cut-up roofs, dormers, and deck repairs need an on-site look before we quote a number. |
| Travel | Included | In Wichita and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair or reseal | Starting at $450 | Covers one penetration reseal, a small seam fix, or replacing a handful of screws and washers. |
| Panel replacement | Starting at $850 | Includes cutting out and replacing one damaged panel with matching material and new fasteners. |
| Flashing and chimney repair | Starting at $650 | Rebuilds failed step flashing or chimney flashing, with price driven by height and access. |
| Screw replacement and re-fastening | Starting at $550 | Pulls backed-out screws and installs oversized fasteners with new washers across the affected area. |
| Complex or large-scale repair | On estimate | Multi-panel damage, steep two-story access, or rust treatment needs an on-site look first. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak repair | Starting at $450 | Includes diagnosis, water test, one fastener or flashing fix, and re-test on site. |
| Multi-point leak repair | Starting at $650 | Covers two or more separate entry points, common after hail on exposed-fastener roofs. |
| Flashing or skylight leak repair | Starting at $750 | Rebuilds chimney, skylight, or pipe boot flashing with new metal and butyl tape. |
| Emergency tarping | Starting at $350 | Storm response to secure the roof and stop water until permanent repair can be scheduled. |
| Complex or large-scale job | On estimate | Panel replacement, widespread hail damage, or steep access needs an on-site look first. |
| Estimate | Free | Call (316) 330-3219 for a no-obligation estimate, with response within 24 hours. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small roof) | Starting at $750 | Replaces marked loose screws and cracked washers on a limited failure zone, single-story access. |
| Full screw replacement (single-family) | Starting at $1,450 | Pulls and replaces all original fasteners with oversized screws and new washers across the roof. |
| Oversized screw upgrade | Starting at $1,850 | Steps up fastener diameter where wind has elongated holes in the purlin, priced by count. |
| Re-fastening plus lap and penetration reseal | Starting at $2,200 | Adds sealing at panel laps, ridge, and vents where active slow leaks show up. |
| Large agricultural or commercial shop | On estimate | Roof size, pitch, and fastener count need an on-site walk before a number is given. |
| Estimate | Free | On-site roof walk with a written fastener count, response within 24 hours at (316) 330-3219. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard corrugated panel roof | Starting at $5.50/sq ft | Includes panels, trim, closures, fasteners and labor on a straightforward outbuilding. |
| Ribbed R-panel shop or garage roof | Starting at $6.25/sq ft | Heavier gauge and taller ribs; price rises with pitch, height and access difficulty. |
| Tear-off and deck repair | Starting at $1.75/sq ft | Removal of old roofing plus replacement of soft purlins or rotten fascia before install. |
| Complex or large agricultural building | On estimate | Long spans, grain-bin shelters and multi-building farms need an on-site look first. |
| Travel | Included | Covered in Wichita and surrounding Sedgwick County towns, with no separate call-out fee. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation (painted steel) | Starting at $9/sq ft | Includes tear-off, underlayment, and standard trim; pitch and deck condition move the price. |
| Stone-coated steel shingles | Starting at $11/sq ft | Includes mineral-coated panels and upgraded trim; steeper roofs and complex valleys add cost. |
| Class 4 impact-rated metal shingles | Starting at $10/sq ft | Includes impact-rated panels and fasteners; may qualify for insurance discounts in Wichita. |
| Complex or large-scale job | On estimate | Dormers, multiple valleys, and deck repair need an on-site look before we quote. |
| Travel | Included | In Wichita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (316) 330-3219, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Includes tear-off, underlayment, standard flashing, and disposal on a simple gable roof. |
| Stone-coated steel, premium profile | Starting at $12/sq ft | Shake or tile profile with more cut work, higher pitch, and added detail at valleys and ridges. |
| Retrofit over existing shingles | Starting at $7/sq ft | Steel laid over the old roof where local code allows, with new underlayment at the eaves. |
| Complex or steep-pitch roof | On estimate | Multiple valleys, dormers, chimneys, and steep sections need an on-site look before pricing. |
| Travel | Included | in Wichita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (316) 330-3219, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Porch roof or dormer cap in copper | Starting at $20/sq ft | Includes shop-formed flat-seam panels and soldered corners, with access and height driving the final rate. |
| Bay window or small accent roof | Starting at $22/sq ft | Covers custom templating and formed flashings, with complexity of surrounding trim moving the price. |
| Full architectural copper roof | On estimate | Needs an on-site look because alloy, square footage and seam style all move the number. |
| Zinc or aluminum specialty work | Starting at $18/sq ft | Includes formed panels and flashings, with the metal choice and roof pitch affecting the rate. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic prep and reflective coat | Starting at $2.50/sq ft | Includes wash, spot prime, and one reflective coat on sound panels; size and pitch move the price. |
| Rust treatment and two-coat system | Starting at $3.25/sq ft | Adds wire-brush rust removal, rust-inhibitive primer, and a finish coat; severity of rust drives cost. |
| Elastomeric coating for shops and commercial | Starting at $3.75/sq ft | Thicker film for low-slope and light commercial roofs; square footage and access add to the total. |
| Historic or HOA color restoration | On estimate | Color matching and design review add scope; we need an on-site look before quoting. |
| Travel | Included | In Wichita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (316) 330-3219, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing repair | Starting at $600 | Covers removal and replacement of counterflashing on one standard chimney with normal roof access. |
| Skylight flashing repair | Starting at $750 | Includes new curb flashing and sealant; price rises if curb framing or underlayment is rotted. |
| Valley or step flashing replacement | Starting at $900 | Removes failed valley metal and installs new woven flashing; cost depends on panel or shingle removal. |
| Complex or multi-penetration job | On estimate | Multiple chimneys, skylights, or wall transitions require an on-site look before we quote a number. |
| Travel | Included | In Wichita and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (316) 330-3219, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single roof plane, pad guards | Starting at $1,200 | Covers layout, materials, and mounting on one straightforward roof plane with normal access |
| Standing seam with seam clamps | Starting at $1,600 | Non-penetrating clamps cost more in material and take longer to set than exposed-fastener mounts |
| Bar and rail system | Starting at $1,900 | Continuous rails over long runs, priced by linear footage and roof height |
| Two-story or multi-section roof | On estimate | Stacked roof sections and steep access need an on-site look before we quote a number |
| Estimate | Free | Response within 24 hours at (316) 330-3219, no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, fastener, and flashing inspection with photo documentation and a written repair versus replacement assessment. |
| Minor repair (fasteners, flashing, reseal) | Starting at $250 | Includes screw and washer replacement plus resealing penetrations, priced by roof pitch and access difficulty. |
| Panel and section replacement | Starting at $900 | Includes matching panel profile and color, priced by panel type, roof height, and number of damaged sections. |
| Full replacement with insurance documentation | On estimate | Widespread damage needs an on-site look and a documented scope before any number is given. |
| Travel | Included | In Wichita and surrounding Sedgwick County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full roof walk, fastener and flashing check, same-day written report with photos included. |
| Post-storm insurance inspection | Free estimate | Hail and wind damage documentation with photos formatted for your insurance adjuster. |
| Pre-purchase inspection | Starting at $150 | Full roof and attic review with written report, priced by roof size and access difficulty. |
| Commercial and agricultural roof | On estimate | Large square footage and low-slope access require an on-site look before quoting. |
| Travel | Included | in Wichita and surrounding Sedgwick County cities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, no obligation to book any work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes 5-inch or 6-inch seamless aluminum, hidden hangers, and standard downspouts; run length and downspout count move the price. |
| Oversized downspouts and high-volume system | Starting at $14/linear ft | Includes 3x4 downspouts and heavier hanger spacing for large roof areas; roof size and access drive the increase. |
| Gutter guards with metal roof profile match | Starting at $12/linear ft | Includes screen or hood guards fitted to your panel profile; tree canopy density and roof pitch affect the final figure. |
| Steel or copper gutter system | On estimate | Material cost and custom fabrication for specialty metal require an on-site measure before we quote a number. |
| Fascia repair and custom hanger fabrication | On estimate | Rotted fascia replacement and custom strap hangers depend on what we find behind the existing gutter. |
| Estimate | Free | Written estimate with gutter size, hanger type, and downspout count; response within 24 hours at (316) 330-3219. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair and re-fastening | Free estimate | Includes roof walk, leak-point documentation and a written repair scope for your building. |
| Exposed-fastener panel replacement | Starting at $5.50 per sq ft | Includes tear-off, new ribbed panels, closures and fasteners; access and height move the price. |
| Standing seam installation | Starting at $9.00 per sq ft | Includes concealed-clip panels and trim; roof complexity and insulation drive the final number. |
| Insulated metal panel system | On estimate | Needs an on-site look to confirm purlin spacing, span and insulation thickness before quoting. |
| Travel | Included | In Wichita and surrounding Sedgwick County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (316) 330-3219, with no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Wichita need a crew that understands the local building stock, not a call center reading from a script. Wichita Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair on homes and outbuildings across the region. We work on everything from 1910s Craftsman bungalows in College Hill to post-war brick ranches on the east and west sides, and from newer two-story homes in Derby to farmhouses and shops out in the wheat country.
The conditions here are specific: spring supercells and large hail, relentless plains wind, hot summers, and winter ice storms that push water into every gap. Add the large stock of 15- to 30-year-old exposed-fastener roofs whose screws are backing out, and you have a climate that punishes shortcuts. We serve Wichita, Derby, Haysville, Maize, Park City, and the surrounding communities with honest guidance and workmanship that holds up. For a straight answer on your roof, request a free estimate and we will tell you what we see.
Most metal roof leaks in Wichita start at a fastener. On 15- to 30-year-old exposed-fastener roofs, the EPDM sealing washer under each screw dries out, shrinks, and eventually lets water past. The screw may still look tight, but the seal is gone. Other common failures include seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels after a storm, and punctures from fallen limbs. Each one has a different fix, and guessing wrong wastes money.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so the stain on your ceiling may be ten feet from the actual gap. By the time it shows, you can be looking at rotted sheathing, saturated insulation, and interior damage. That is why we start with a proper inspection and tell you plainly what is failing and why.
The honest repair-versus-replace call matters here. If the panels are sound and the problem is fasteners and seals, a full screw replacement often restores a watertight roof for a fraction of replacement cost. If panels are rusted through or the deck is soft, repair is throwing money at a losing battle. Call (316) 330-3219 for metal roof repair or metal roof leak repair, and we will give you a straight recommendation.
We install the full range of metal systems: standing seam with concealed clips and no exposed fasteners, corrugated and ribbed exposed-fastener panels as the economical workhorse for barns, shops, and cabins, plus metal shingles, stone-coated steel, and copper and specialty metal for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. We also handle metal roof over shingles (retrofit) when the deck is sound, and tear-off when it is not. Matching the system to your home, budget, and wind exposure is the whole job.
Metal roof projects are typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We give typical ranges rather than fixed numbers, because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can quote your actual roof instead of a ballpark.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is document what we find accurately so you have solid information to work with.
On permits: in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Wichita building or planning department before starting your project. If you have questions about the process, contact us and we will point you in the right direction.
Ready to get started? Wichita Metal Roofing serves in Wichita and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Wichita · Response within 24h · No commitment · ☎ (316) 330-3219
Your Free Quote Request